Info : Votre navigateur n'accepte pas les cookies. Si vous désirez ajouter des articles à votre panier et les acheter en ligne sur notre site, votre navigateur doit accepter les cookies de notre site.
Home Cinéma Amplificateurs Amplificateurs
( Manufacturer )
Prix à l'Unité (pièce):
€6 300.00 (Taxes 19.6 % comprises)
€4 500.00
(Taxes 19.6 % comprises)
Disponibilité
Actuellement livré en:
Specifications
The correlation between published specifications and performance is unreliable.
Measurements of the your amplifier yield excellent results by any standards. However,
only those specifications that apply to its actual operation are included here.
All specifications are subject to change at any time, in order to improve the product.
Nº333 Rated power output : 300 w/ch continuous rms power @ 8 O
600 w/ch continuous rms power @ 4O
1200 w/ch continuous rms power @ 2O
Nº332 Rated power output : 200 w/ch continuous rms power @ 8 O
400 w/ch continuous rms power @ 4O
800 w/ch continuous rms power @ 2O
Nº331 Rated power output : 100 w/ch continuous rms power @ 8 O
200 w/ch continuous rms power @ 4O
400 w/ch continuous rms power @ 2O
all above power ratings from 20 Hz–20kHz at <0.5% THD
Frequency response : within 0.1 dB from 20 Hz to 20 kHz
Signal to Noise ratio (main outputs) : better than –80 dB (ref. 1 w)
Input impedance : 100k O (balanced) 50kO (single-ended)
Voltage gain : 26.8 dB
Input sensitivity (2.83V output) : 130 mV (all models)
Input sensitivity (full output) : 2.25V for Nº333 1.80V for Nº332
1.30V for Nº331
Power consumption (Nº333) : 350W ( ± 5%) at idle, 200W ( ± 5%) in standby
Power consumption (Nº332) : 325W ( ± 5%) at idle, 200W ( ± 5%) in standby
Power consumption (Nº331) : 260W ( ± 5%) at idle, 110W ( ± 5%) in standby
Mains voltage : determined by the needs of country for which the unit was manufactured; cannot be reset by dealer or user
Overall dimensions : See "Dimensions"
Nº333 Shipping weight : 150 lbs. (68.2kg) each
Nº332 Shipping weight : 150 lbs. (68.2kg) each
Nº331 Shipping weight : 112 lbs. (50.9kg) each
Connector complement : four custom binding posts per channel one 3-pin XLR balanced input connector per channel
one RCA input connector per channel
two 1 / 8 " mini-jacks for remote turn-on two Mark Levinson communications ports
one captive high current AC mains cord (Nº333 only), or
one IEC-standard high current AC receptacle (Nº332, Nº331)
Output impedance : less than 0.05 O from 20–20,000 Hz
Damping factor : greater than 800, 20–20,000 Hz @ 8 O
Avis des Clients: Il n'y a pas encore de commentaire sur ce produit.
